Hotpoint HDA1OOOK User Manual

Page 13

PROBLEM

POSSIBLE CAUSE AND REMEDY

SMALL AMOUNT OF

Water around the outlet on the tub bottom at the back of the tub is normal. It is clean

WATER STANDING

water. It’s there to keep the water seal lubricated.

IN THE
OF THE TUB

WATER WON’T PUMP

If the entire bottom of the tub has water, you may have a drain problem. Clean the air

OUT OF THE TUB

gap, if you have one. (See page 14.)

Check the kitchen sink. Is it draining well? You may need a plumber,

If dishwasher drains into disposer, run disposer to clear. Be sure disposer is not
clogged.

SUDS IN THE TUB

detergents are not meant for dishwashers. USE ONLY

DISHWASHER DETERGENTS

AVOID

To remove suds from the tub: Open the dishwasher. Let suds evaporate. Add 1 gallon
of cold water to the tub. Close and latch the dishwasher. Pump out water by slowly
turning the control dial until a drain period is reached.

Repeat if necessary.

DISHWASHER LEAKS

Suds can cause unit to overflow. That’s why it’s so important to use a detergent that’s

designed for automatic dishwashers.

Spilling the rinse agent can cause foam during washing. This can lead to overflowing.

Wipe up accidental spill of rinse agent with a damp cloth.

If you need more

help.. call, toll free:

GE Answer Center”

800.626.2000
consumer information service