Hoover Power Nozzle - Manual (Page 2)

q
Unpack cleaner from carton and
identify the parts shown. Remove
and dispose packing.
A. Canister Cleaner
B. Power nozzle
C. Paper bag (installed in cleaner)
D. Extension wands, hose and
cleaning tools (only one of the
combinations shown is included)
The assembled cleaner will look like
the drawing above.
3
6 -
7 -
1 nozzle
storage clip*: place
cleaner on end and hook clip on
bottom of cleaner
Lightweight hose
Spring latch:
locks extension
wands together or locks wand to
nozzle or tool.
3.
4.
5.
6.
7.
8.
9.
Plastic latch ring on plastic
wands: see item
Extension wands: used with rug
and floor nozzle. One or both
wands may be used with cleaning
tools. (Some models have
plastic
wands; some models have metal
wands.)
Hand grip
Receptacle:
connects power nozzle
cord underneath hand grip.
Cord clip: fastens nozzle cord to
extension wands. On some models
a separate cord clip snaps onto
wands.
Suction regulator: close for maxi-
mum suction; open if power nozzle
is difficult to push on some carpets
or if lightweight rugs or draperies
are being cleaned.
located on hand
grip and plastic wands; rotate to
lock wands and cleaning tools to
hose.
11. Cord hook: rotate hook inward for
quick cord release.
On some models:
Cord rewind pedal: step on pedal
to rewind cord for storage. Hold
plug until cord is rewound.
12. Dusting brush
13. Crevice tool
14. Wall/floor brush*
15. Furniture nozzle
16. Large wheels:
provide easy towing
when cleaner is pulled over carpet,
area rugs and door sills.
17. On-Off pedal: conveniently located
on top of cleaner.
18. Bag lid latch: lift to open bag lid.
19. Bag lid
20. Check bag indicator*:
shows red
when paper bag should be
checked for fullness.
21. Hose connector
22. Receptacle:
connects power nozzle
cord to canister cleaner.
23. Carrying handle
24. Headlight*
*Available on some models
This cleaner is intended for household
use.
fied on data plate on bottom of cleaner.
2