Hoshizaki RELIABILITY IS A BEAUTIFUL THING DCM-270BAH-OS - Manual (Page 40)

40
28) Assemble the removed parts in the reverse order of which they were removed
WARNING
Be careful not to scratch the surface of the O-ring, or it may cause water leaks.
Handle the mechanical seal with care not to scratch nor to contaminate its
contact surface.
29) Check for water leaks.
WARNING
After assembling the extruding head, be sure to check that the auger does not
come into contact with the inner surface of the evaporator and that there is not
any abnormal noise from the bearing.
30) Turn on the power supply.
31) Move the ice making switch to the “ON” position.