haier AD422BMBAA - Manual (Page 11)

TIMER ON TIMER OFF TIMER ON-OFF
Blank
Then choose the TIMER ON-OFF mode.
At this time the" "will flash.
ON
SET
ON/OFF
MODE FAN SWING
TEMP
CLOCK SET
TIMER SLEEP
RESET
FILTER RESET
9
Operation instruction
Timer On-Off function
Cancel TIMER
Press the TIMER button several times until the TIMER mode display disappears.
According to the sequence of TIMER ON & TIMER OFF setting, you can
realize turning on unit first, then turning off unit.
After adjusting time, press SET button to confirm time.
The time displayed is: at x oíclock x minutes the unit will be turned on.
At this time, the* *will not flash ,* *begins to flash.
5. Set the TIMER OFF time
Press the TIME button, the adjustment method is the same as the one of
setting TIMER ON time.
6. Confirm the time of TIMER OFF
After adjusting time, press SET button to confirm time.
The time displayed is: at x oíclock x minutes the unit will be turned off.
ON OFF
5
6
2.Set of TIMER mode
Press the TIMER button to change the
TIMER mode, each press the TIMER mode
will change as the following sequence:
1.Turn on the unit
After turning on the unit, set the desired
working mode.
The LCD of the wire controller will show
working mode. (except for Timer, Sleep,
Swing)
* Each press, the set time increases 10 minutes. If depress the button, the
time will increase rapidly.
*Each press, the set time decreases 10 minutes. If depress the button, the
time will decrease rapidly.
3.Set time
Press the time adjusting button
This LCD will show the time set, the time can be adjusted within 24h.
(AM stands for morning, PM stands for afternoon).
4.Confirm the time
OFF ON OFF ON
AM
PM
AM
PM
At this time, the" "will not flash.
OFF