beautypg.com

How to use, Cleaner description, On-off switch – Hoover S2200 User Manual

Page 4: Polarized plug, Self-propel feature, Transporting cleaner

background image

16. Nozzle control knob:

slide knob to correct
setting for height of car-
pet being cleaned.

17. Brush roll control
18. Furniture guard
19. Headlight
20. Edge groomers
21. Hose
22. Hose rack
23. ‘Dirt FINDER’ display

*

24. Embedded ‘Dirt FINDER’

sensitivity switch

*

25. Cord hooks:

wrap

cord around hooks for
storage. The top hook
can be rotated right or
left for easy cord
release.

26. Carrying handle
27. Extension wands
28. Crevice wand:

stores in

rear wand.

*available on some
models

The assembled cleaner will
look like the drawing.

1.

Handle

2. Self-propel button
3.

ON-OFF switch

4.

Tool cover

5.

Powered hand tool

6.

Dusting brush

7.

Furniture nozzle

8.

Dirt cup latch

9.

Dirt cup lid

10. Dirt cup
11. Dirt cup handle
12. HEPA cartridge filter

(inside dirt cup)

13. Pre-filter

(inside dirt cup)

14. Final filter
15. Three-position handle

release pedal:

step on

pedal to lower handle to
operating or low posi-
tions.

4

2-2

2-3

NOTE: Hose must be co

ON-OFF Switch

Plug cord into electrical outlet.
To turn cleaner ON, push switch (A) up.

To turn cleaner OFF, push switch down.

Polarized plug

Note: To reduce the risk of electric
shock, this appliance has a polarized
plug (one blade is wider than the other).
This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.

2-1

Operate cleaner only at voltage specified on data plate on
bottom of cleaner.

2. How to use

Cleaner description

1

2

3

4

5

7

8

9

12

16

10

13

14

15

17

11

25

26

28

27

22

23

24

20

A

19

21

18

6

This cleaner is intended for household use.

Self-propel feature

This feature allows you to control how
quickly the cleaner moves.

Note: The self-propel feature oper-
ates only when the cleaner switch
and the self propel button are both
ON.

To move forward,

push handle for-

ward and guide cleaner away from you.

To move backward,

gently pull handle

back and guide the cleaner toward you.

Guide cleaner carefully at first until you
have adjusted to the ease of operation.

For increased control in tight places

(e.g., around and under furniture, non-
carpeted floors), slide the self-propel
button to OFF to deactivate the feature.

Transporting cleaner

To move your cleaner from room to
room, put handle in upright position, tilt
cleaner back on rear wheels and push
forward.

2-4

21