Hunter Fan 44250 User Manual

Page 31

HEATING OR COOLING DOES NOT GO
ON OR OFF

ERRATIC DISPLAY

IF UNIT CONTINUES TO OPERATE IN OFF
POSITION

THERMOSTAT READS , HI, LO
PERMANENTLY

1. Check that function switch is in correct

position (“HEAT” or “COOL”).

2. There may be as much as 20 seconds

delay in the thermostat turning the system
on - wait and check.

3. Check your circuit breakers and switches

to ensure there is power to the system.

4. Replace batteries.
5. Make sure your furnace blower door is

closed properly.

6. If your system only uses 4-wires, be sure

the jumper wire is installed between the
RC and RH terminals.

1. Press the reset button once with a small

pin and hold in for two seconds. Then
reprogram.

1. Replace unit.

If you experience any other problems, call 1-800-676-7861 from 8AM to 5PM Central Standard
time for technical assistance.

AJ514/41253 book p. 16-32 2/8/01 3:19 PM Page 14