Hunter Fan 44250 - Manual (Page 21)

Your thermostat can be programmed in two
different ways.
1. Auto-program method
2. Manual method
Before programming, position the Heat/AC
selector to the type of program desired.
Auto-program method
In auto-program method, you can program
your thermostat instantly for the entire week
by simply pressing “Auto Prog.” key once.
When this key is pressed, standard program
gets activated and your thermostat is
programmed automatically. The standard
program is shown in the table.
If you wish to change this program to suit
your life style, you can do so by changing
the time and the temperatures of those
programs which you want to be different
than standard programs. The method is
explained in the manual method of
programming.
Press Your thermostat will be
programmed automatically according to Table 3.
(If the slide switch is in the heat mode, only
heat program is effective. In order to activate
cool program, slide the switch to cool mode
and press “Auto Prog.”)
Manual method
In this method, each program is inserted
according to your personal programming
schedule.
When the battery is first inserted, the
thermostat is programmed for 68°F (20°C) in
heat mode and 78°F (25°C) in cool mode.
NOTE: There are no energy saving time or
temperature settings.
Programming Your Thermostat
PROGRAM
NUMBER
TIME TEMP IN F° (C°)
HEAT
COOL
1 5:00AM 68 (20) 78 (25)
2 7:00AM 60 (15) 85 (29)
3 3:00PM 68 (20) 78 (25)
4 10:00PM 62 (16) 82 (27)
1 5:00AM 68 (20) 78 (25)
2 10:00PM 62 (16) 82 (27)
AUTO
PROG
MON. –
FRI.
TABLE 3
SAT. &
SUN.
AJ514/41253 book p. 16-32 2/8/01 3:19 PM Page 4