Healthrider 8.5ex Crosstrainer HREL8806.1 - Manual (Page 12)

12
HOW TO CONNECT A 75 OHM CATV CABLE
1. Connect a 75 ohm
CATV cable to the 75
ohm terminal on the
elliptical exerciser
frame.
HOW TO CONNECT AN EXTERNAL SOURCE
USING A CATV CABLE
1. Connect one end of a 75 ohm CATV cable to the
video output jack on your external source.
2. Plug in the power cord of your external source.
See your external source’s user’s manual for prop-
er grounding instructions.
3. Connect the 75 ohm CATV cable to the 75 ohm
terminal on the elliptical exerciser frame.
HOW TO CONNECT A DVD PLAYER OR VCR
USING THE AUDIO/VIDEO INPUT JACK
Plug one end of an RCA component video cable into
your DVD player or VCR, and plug the other end into
the audio/video input jack on the back of the console.
75 Ohm Terminal
75 Ohm CATV Cable
Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the
elliptical exerciser or a VCR or DVD player to the audio/video input jack. Note: Use a CATV cable to connect
to an external source such as a cable box, analog cable, satellite TV box, or VCR. No CATV cable or RCA com-
ponent video cable is included.