Harbor Freight Tools Drill Master 18V 3/8" Cordless Drill 67024 - Manual (Page 7)

SKU 67024 For technical questions, please call 1-800-444-3353. Page 7
FunCtIOnaL DESCRIptIOn
Specifications
Battery Type NiCd / 18V
Chuck Capacity/
Type
3/8” / Keyless
Speed 0-900 RPM
Torque Settings 24 (Forward and Reverse)
InItIaL tOOL SEt up/
aSSEmBLY
Read the EntIRE ImpORtant
SaFEtY InFORmatIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
unpaCkIng
When unpacking, make sure the
item is intact and undamaged. If parts
are missing or broken, call Harbor Freight
Tools at 1-800-444-3353.
InStRuCtIOnS FOR
puttIng IntO uSE
Read the EntIRE ImpORtant
SaFEtY InFORmatIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
tO pREVEnt
SERIOuS InjuRY
FROm aCCIDEntaL
OpERatIOn: turn tool off
and remove Battery pack
before assembling or making
any adjustments to the tool.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Functions
OpERatIng InStRuCtIOnS
Read the EntIRE ImpORtant
SaFEtY InFORmatIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Inspect tool before use, looking
for damaged, loose, and
missing parts. If any problems
Chuck
Drill Bits
Trigger
Torque Adjusting
Ring
Chuck Adjusting
Knob
Battery
Pack