haier HDT18PA - Manual (Page 24)

23
Your dishwasher is equipped with a gravity drain system. The drain hose should
be positioned above the drain in order to drain properly.
If the drain hose is bent or shrunken, it may affect water draining.
If water can not be drained out smoothly, the dishwasher operation will be
disturbedand it may stop in the middle of the cycle.
Grounding Instructions
Understanding the Drain Hose Hook Up:
This appliance must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electric current.
This appliance is equipped with a cord having a grounding wire with a grounded plug.
The plug must be inserted into an outlet that is properly installed and grounded.
Electrical Connections
Wiring Requirements:
This appliance must be plugged into at least 15
AMP 115-120 VOLT, 60 HZ GROUNDED OUTLET.
Note: Where a standard two-prong outlet is
encountered,it is the personal
responsibilityand obligation of the
consumer to have it replaced with a
properly grounded three-prong outlet.
Extension Cords:
We do not recommend that you use an extension cord.
Power Interruptions
Occasionally there may be power interruptions due to thunderstorms or other causes.
Remove the power cord from AC outlet when a power outage occurs. When power
has been restored re-plug power cord to AC outlet. If outage is for a prolonged period,
clean washer before using it again.
Improper use of the plug can result in a risk of electric shock.
Consult a qualified electrician or service person if the grounding
instructions are not completely understood or if doubt exists as to
whether the appliance is properly grounded.
GB