Onnecting the, Isplay to your, Omputer – Hitachi CML152XW User Manual
Page 17: Connecting the display to your computer
16
ENGLISH
Connecting the Display to your Computer
1.
Power off your computer.
2.
Connect one end of the signal cable to the LCD Monitor's VGA port. (See Fig. 1-4)
3.
Connect the other end of the signal cable to the VGA port on the PC.
4.
Make sure both connections are secure.
Figure 1-4
ATTENTION
This device must be connected to an off-the-shelf video cable in order to comply with
FCC regulations. A ferrite-loaded interface cable is included in the LCD Monitor package.
This device will not be in compliance with FCC regulations when a non-ferrite-core video
cable is used.