haier HL32R - Manual (Page 18)

Choose the Menu Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
In the manual, the OSD (on screen display) may be
different from your TV`s, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in order
for your TV to work properly. Read the instructions that
follow.
Initial Setup: Set according to the screen display.
Note
If the TV in power on , the screen show information
according the type of input signal . the information will
disappear. If there is no signal ,
No Signal will display
on the screen.
1 Choose TV Input and then press MENU button.
2 Press / button to select Function menu.
3 Press or OK button and then use / button to select
Language.
4 Press button to select language.
English Spanish or French
1. First, connect power cord correctly.
2. Select the viewing source by using INPUT button on
the remote control.
3. When finished using the TV, press POWER button on
the remote control. The TV reverts to standby mode.
4. If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
Change the picture source so you can watch your TV,
VCR, DVD, Cable , or any other devices that are
connected to your TV.
1. Press INPUT button to enter the Select Source menu
and then use / button to select the desired items
TV, Video1, Video2, S-Video,Component1,
Component2, VGA, HDMI1,HDMI2 .
2. Press OK button to confirm .
Operation
Select Source
TV
Video1
Video2
S-Video
Component1
Component2
HDMI1
HDMI2
VGA
Operation
Switching On/Off the TV set
Choose the Input source
18 TV LCD-TFT
Video
Audio
Channel
Lock
Function
Function
Language English
OSD Timeout Short
OSD Transparency Middle
Screen Mode On
Blue Mute
DPMS On
Time Setup
Closed Caption
Default
Select / Back EXIT