Harman-Kardon AVR 135 - Manual (Page 2)

2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
4
Unpacking
5 Front Panel Controls
7 Rear Panel Connections
9 Remote Control Functions
12 Installation and Connections
12
Audio Equipment Connections
12 Video Equipment Connections
13 SCART A/V Connections
14 AC Power Connections
14 Speaker Selection and Placement
15 System Configuration
15 First Turn On
15 Using the On-Screen Display
15 System Setup
16 Input Setup
16 Speaker Setup
19 Surround Setup
19 Night Mode Settings
20 Configuring the Surround Off
(Stereo) Modes
20 Delay Settings
21 Output Level Adjustment
23 Operation
23 Surround Mode Chart
25 Basic Operation
25 Source Selection
25 6/8-Channel Direct Input
26 Controls and Use of Headphones
26 Surround Mode Selection
27 Digital Audio Playback
27 Dolby Digital
27 DTS
27 PCM Audio Playback
27 Selecting a Digital Source
27 Digital Bitstream Indicators
28 Surround mode Types
28 PCM Playback Indications
28 Speaker/Channel Indicators
29 Night Mode
29 Tape Recording
29 Output Level Adjustment
With Source Signals
30 Memory backup
31 Advanced Features
31 Front Panel Display Fade
31 Display Brightness
31 Turn-On Volume Level
31 Semi-OSD Settings
32 Full-OSD Time Out Adjustment
33 Tuner Operation
33 Basic Tuner Operation
33 Station Selection
33 Preset Tuning
33 RDS Operation
33 RDS Tuning
33 RDS Display Options
34 Program Search
35 Programming the Remote
35 Programming the Remote with Codes
35 Direct Code Entry
35 Auto Search Method
35 Code Readout
36 Macro Programming
36 Programmed Device Functions
36 Volume Punch-Through
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
1 – (number in a square) indicates a specific front-panel control
0 – (number in a circle) indicates a rear-panel connection
0 – (number in an oval) indicates a button or indicator on the remote
The appearance of the text or cursor for your receiver’s on-screen menus may vary slightly from the
illustrations in this manual. Whether the text appears in all uppercase or upper- and lowercase
characters, performance and operation remain the same.
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product described in
this owner’s manual is in compliance with technical stan-
dards:
EN 55013:2001 + A1:2003
EN 55020:2002 + A1:2003
EN 61000-3-2:2000
EN 61000-3-3:1995 + A1:2001
EN 60065:2002
Jurjen Amsterdam
Harman Consumer Group International
01/05
37 Channel Control Punch-Through
37 Transport Control Punch-Through
37 Resetting the Remote Memory
38 Function List
40 Troubleshooting Guide
40 Processor Reset
41 Technical Specifications