haier XQB50-10A - Manual (Page 18)

(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending it to
repair. If there are real breakdowns, please come to the special maintenance department .
Do not repair it by yourself.
Phenomena The reason How to settle
The top lid is not closed
Is the drain hose put down?
Is the drain hose blocked by
foreign material?
Are the laundries put slantingly?
Is the machine slanting?
The water tap is not open
The water inlet valve is blocked
The water pressure is too low
and the current is too small
Is there power failure?
Is the power plug loose?
The machine does
not act
Close the top lid
Put down the drain hose. Open
and close the top lid once.
Clean the foreign material.
Open and close the top lid once.
Re-order the laundries. Close
the top lid.
Level the machine in right
position. Open and close the
top lid once.
Open the water tap. Push the
"Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
Use it when the power is on.
Insert the power plug tightly.
Trouble shooting Answer to question
Does the water level arrive at the
set water level? Affusion to the set water level.
Is the power plug loose? Insert the power plug tightly.
Is the top lid closed? Close the top lid
Are the laundries put orderly? Put the laundries orderly.
Not spin
Not wash
Buzzing upon reservation starts,
Nixie tube indicates "E0"
Safety switch actuates, not
spin, (after self-correction
twice), nixie tube displays
"E3", buzzing
No or slow water filling (not
reaching the level in 15 min),
nixie tube indicates
"E4",
buzzing
No or slow drain, nixie tube
indicates "E1" , buzzing.
The top cover leaves open Close the top lid Running pauses during spin,
nixie tube indicates "E2”,
buzzing
No water filling
Is the power plug loose?
If the water faucet is turned on?
If Power On/Off and
Start/Pause are pressed? Insert the plug firmly
Turn on the water faucet
Press Power On/Off and
Start/Pause
There's abnormal sound
inside the machine.
Is there metal material inside
the washing machine?
Are the laundries slanting in
spinning?
Is the machine slanting? Level the machine properly.
Fasten the buttons and zipper
Reorder the laundries. Close the
top lid.
The machine does not act.
(the indicators are off.) Is there power failure?
Is the power plug loose?
Use it when the power is on.
Insert the power plug tightly.