haier XQB50-10A - Manual (Page 16)

Total time: including the normal water inlet time, drain time, excluding the power off time. The
total washing time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing.
The Jeans program could combine the process of soak during which the washing
machine firstly soak for about 25~45 min after water filling and then begins to wash.
When "Quick wash" program is chosen, the washing machine would automatically set water
level and full processes of wash, rinse and spin.
Using process Using process
5 Press the "start/pause" button
5 Close the top lid
When the machine working, if the
top cover is opened, the washing
machine will stop running and alarm.
After switching on the power, press the button " Water level " to select a water level according
to the load. Please refer to the paragraphs “ Detergent standard dosages and water levels "
and " Button of Water level " on page 9.
Page 9
Page 9
3 Press the "water level" button to select suitable
water level
After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the
" Reservation "
button to set a reserved wash program. Refer to " The button of Reservation " on page 9.
When " Reservation " becomes active, the nixie tube
displays the time to the end of the reserved wash cycle, and
the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
the washing will finish
about 18 hours later
Confirm the reserve program
4 Push the "Reservation" button to select
suitable reserve program
WATER LEVEL
PROGRAM
RESERVATION
PROGRAM
RESERVATION
START
PAUSE START
PAUSE