Harbor Freight Tools Central Pneumatic AIr Nailer/Stapler 2-in-1 Kit 97525 - Manual (Page 9)

SKU 97525 Page 9 For technical questions, please call 1-800-444-3353.
Maintenance
Warning! Always disconnect the tool from the air compressor and then empty the magazine
of nails or staples before attempting to inspect or perform maintenance to the Nailer/
Stapler.
1. Inspect all of the nuts and screws and make sure they are securely fastened.
2. Periodically lubricate the driving mechanism and magazine with a light oil. Wipe down
with a clean cloth. Never use gasoline or flammable solvents to clean the tool.
3. Inspect your air compressor according to manufacturer’s instructions.
Warning! If you detect any air leaks, power loss, the Nailer/Stapler skips driving, drives too
deep, or not deep enough, take the Nailer/Stapler to a qualified service technician.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS
OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING
OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR
ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List
Part Description
1 Exhaust Deflector
3 Hex. Bolt
4 Head Cap
5 Seal
6 Internal Lining
7 O-Ring
8 Compression Spring
9 Gasket
10 O-Ring
11 Head Valve Piston
12 O-Ring
13 O-Ring
14 O-Ring
16 O-Ring
17A Piston & Driver
25 Body
26 Nozzle
34 Spring
36 Spring Pin
37 E-Ring
38 Trigger
39 Pin
40 Safety Guide
41 Spring Pin
42 Safety
43 Non-Marking Tip
Part Description
44 Hex Bolt
45 Stopper
46 Compression Spring
47 Safety Cover
48 Safety Cover Bolt
49 Spacer
50 Driver Cover
51 Hex. Bolt
52 Driver Guide
53A Magazine B
54 Steel Bar
55 Pusher Unit
56 Spring Holder
58 Spring
59 Spring Washer
60 Hex Bolt
61 Magazine A
62 Magazine Bracket
63 Hex Bolt
64 Hex Bolt
65 Lock Nut
66 Retainer Pin
67 Latch
68 Spring
69 O-Ring
70 Hex Bolt
Part Description
71 Cylinder Pin
72 Magazine Tail Cover
73 Lock Nut
74 Hand Grip
75 O-ring
76 End Cap
77 Air Plug
78 Collar
79 Fixed Ring
80 O-Ring
81 Ling Ring
82 O-Ring
83 Cylinder
84 Ling Ring
85 Bumper
86 Seal
87 Trigger Valve Upper
88 Spring
89 O-Ring
90 Trigger Plunger
91 Trigger Plate
92 Trigger Valve Lower
93 Trigger Plate