Holman DIAL EZY N10372 - Manual (Page 6)

PAGE 9
Programming
Odd / Even Day Selection (Optional)
In some regions, users are only allowed to water their
gardens on, ODD dates if their house number is ODD, or
on EVEN dates when their number is EVEN .
This controller allows this to be done simply by setting
the relevant selection of ODD or EVEN and setting the
current date into the controller. The controller will account
for leap years.
If you require the ODD / EVEN day option, simply press
the
next button until “ODD” is shown. Press the next
button and “EVEN” will be shown. This feature may be
required in areas where water restrictions are enforced.
Note: Remember to set the 365 day calendar when
setting the clock, or this feature will be out of sequence.
Step 3. Set Station Run Times
This is the length of time that each station (valve) is set to
water on a particular program. Maximum watering time is
12 hours 59 minutes for each station. A station can be
assigned to 1 or 2 programs if required.
Turn the dial to the Set Station Run Times position and
the display will show the following:
This means station 1 has a default run time of 10
minutes in program 1. “Station 1” will be flashing.
Programming
Step 2. Set Watering Days
This unit has interval watering or individual day selection
from everyday to every 15th day or a 365 day calendar
with odd/even day selection in areas where water
restrictions require this feature.
Turn the dial to Set Watering Days.
Interval Day Selection
The display will show:
“Interval 1” will be flashing.
This means that watering will occur every day.
To change the interval day, press the button.
Examples: Interval 2 means watering will take place every
second day, 3 means watering will take place every third
day etc.
Interval watering can be set from everyday to every 15th
day. The Run Day refers to the number of days before the
next watering program will occur.
Individual Day Selection
Press the next button
This is the selectable day option.
The display will show:
This refers to Mon being Day 1. To turn Monday off, press
button. To leave Monday active, leave as is and
advance to Tuesday (day 2) by pressing the next button.
Again press the button to set the day off if required
followed by next to advance. Continue until all seven
days have been set “on” or “off” .
PAGE 8