Hoover SteamVac Y Series - Manual (Page 7)

7 Continued ➜
Attach the hose
Select tool
Attach tool
Unplug carpet cleaner from electrical outlet.
✓
Place handle in upright position.
✓
The hose and tool caddy can be removed from the
cleaner if you desire.
✓
Remove hose from tool caddy.
✓
Open hose door (A) on back of carpet cleaner (Fig. 13).
✓
Align hose connector with hose and solution ports (C)
(Fig. 14).
✓
Push hose into port and lock in place.
✓
To remove hose: Squeeze latches (D) on top and bottom
of hose. Remove hose from port (Fig. 15).
✓
Close hose door (A) tightly (inset).
SpinScrub™ hand tool
• Rotating brushes
• Use on carpet to clean
spots, small areas or
stairs
Stair/Upholstery nozzle
• Built-in brush
• Use on upholstery
Unplug carpet cleaner from electrical outlet.
✓
Slide tool onto hose. Snap tool over tab (E) on hose (Fig 18).
✓
To remove tool: Push forward and up on latch (F) (Fig. 19).
Slide tool off hose.
F
E
C
B
D
A
A
A
13
14
15
17
18 19
16