Hoover Shampoo- Polisher - Manual (Page 7)

To attach pads, insert end of
fastener through opening in pad.
Place pad over scrubbing-wax-
ing-polishing brushes only.
The fastener fits around the
brush shaft. Press the fastener to
snap into place. Unsnap fastener
to remove pad.
To attach tank
Attach brushes and pads before
attaching tank.
Set bottom of tank into tank sup-
port.
Turn tank cap lock until the rivet
is directly above slot. Raise tank
cap lock and tank cap. Snap tank
against handle.
Push tank cap down. Slide cap
lock down and turn right or left to
lock tank and cap into position.
6