Husqvarna 325HS99X - Manual (Page 22)

22 – English
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under
various working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
Technical data 325HS75 325HS99
Engine
Cylinder displacement, cu.in/cm
3
1,50/24,5 1,50/24,5
Cylinder bore, inch/mm 1,34/34,0 1,34/34,0
Stroke, inch/mm 1,06/27 1,06/27
Idle speed, rpm 2700 2700
Recommended max. fast idle speed, rpm 10500-12500 10500-12500
Max. engine output, acc. to ISO 8893 0,7/9000 0,7/9000
Catalytic converter muffler No No
Speed-regulated ignition system Yes Yes
Ignition system
Manufacturer/type of ignition system Walbro MB Walbro MB
Spark plug
Champion RCJ 7Y/
NGK BPM7A Champion RCJ 7Y/
NGK BPM7A
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q Zama C1Q
Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5
Weight
Weight without fuel, Lbs/kg 12,6/5,7 13,2/6,0
Sound levels
(see note 1)
Equivalent sound pressure level at the user
′s ear, measured
according to ANSI B175.3-1997, dB(A), min/max:
96 97
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
2
Idle speed, rear/front handles: 2,0/2,9 2,2/2,5
Max. speed, rear/front handles: 1,7/4,2 2,4/4,0
Blades
Length, mm 720 1000
Blade speed, cuts/min 4695 4695