Hoshizaki DB-200H - Manual (Page 12)

12
4. ELECTRICAL CONNECTION 4. ELECTRICAL CONNECTION 4. ELECTRICAL CONNECTION 4. ELECTRICAL CONNECTION 4. ELECTRICAL CONNECTION
WARNING WARNING WARNING WARNING WARNING
1. Electrical connection must be made in accordance with the instructions on
a “WARNING” tag, provided with the pig tail leads in the Junction Box.
2. To prevent possible electrical shock to individuals or extensive damage to
the equipment, install a proper ground wire to the ice dispensing bin that
meets local code requirements.
• A WHITE lead must be connected to the neutral conductor of the power source. Miswiring
results in severe damage to the ice dispensing bin. See Fig. 2.
• The ice dispensing bin must have a separate power supply or receptacle of proper
capacity. See NAMEPLATE.
• Check that the ice dispensing switch and the safety switch are operating correctly.
See Fig. 3.
Ice Dispensing Switch Push the button, and the unit should operate.
You can hear the operating sound.
Safety Switch Continue pushing the button, and move the
spout toward you. Then the safety switch
should operate, and the unit will stop.
• An electrical permit and services of a licensed electrician may be required in some areas.
Fig. 2 Fig. 2 Fig. 2 Fig. 2 Fig. 2
Ice Dispensing Ice Dispensing Ice Dispensing Ice Dispensing Ice Dispensing
Switch (Button)
Switch (Button) Switch (Button) Switch (Button) Switch (Button)
Fig. 3 Fig. 3 Fig. 3 Fig. 3 Fig. 3
Spout Spout Spout Spout Spout
Safety Safety Safety Safety Safety
Switch
Switch Switch Switch Switch
Ice Ice Ice Ice Ice
Station
Station Station Station Station