Hotpoint HDA3400 - Manual (Page 6)

About the dial cycles.
Rinse Only
For rinsing partial loads that will be washed later. Do not use detergent.
Make sure ENERGY SAVER / HEATED DRY OFF is selected.
Be sure the door is unlatched.
Slowly turn the Dial to RINSE ONLY.
Latch the door to start the cycle. 4
3
2
1
HOT PREWASH OPTION
OFF
DELAY
HOURS
1
PLATE WARMER
(HEATED DRY ON)
2
3
4
5
RINSE ONLY
(HEATED DRY OFF)
START
SHORT WASH
Delayed Start
The HOURS DELAY will allow you to delay the start time of any cycle not on the Dial automatically
for up to 6 hours.
Be sure the door is unlatched.
Select the wash cycle and option you want.
Slowly turn the Dial to desired time. The DELAYED START light will come on.
Latch the door to start the cycle. 4
3
2
1
HOT PREWASH OPTION
OFF
DELAY
HOURS
1
PLATE WARMER
(HEATED DRY ON)
2
3
4
5
RINSE ONLY
(HEATED DRY OFF)
START
SHORT WASH
Heavy, Normal or Water Saver
Be sure the door is unlatched.
Slowly turn the Dial to the cycle you want. Don’t turn it past this position, or you could
accidentally miss a rinse.
Select any options.
Latch the door to start the cycle. 4
3
2
1 HOT
OPTION
OFF
PREWASH
DRYING
NORMAL WASH
WATER SAVER
RINSE ONLY (HEATED DRY OFF)
HEAVY WASH
Short Wash
For quickly washing loads of everyday dishes with medium soils that have not dried on.
Be sure the door is unlatched.
Slowly turn the Dial to SHORT WASH.
Latch the door to start the cycle. 3
2
1
HOT PREWASH OPTION
OFF
DELAY
HOURS
1
PLATE WARMER
(HEATED DRY ON)
2
3
4
5
RINSE ONLY
(HEATED DRY OFF)
START
SHORT WASH
Plate Warmer
For warming clean dishes and serving plates. This cycle will take approximately 32 minutes.
Load clean dishware to be warmed.
Select HEATED DRY / HEATED DRY ON.
Be sure the door is unlatched.
Slowly turn the Dial to PLATE WARMER.
Latch the door to start the cycle. 5
4
3
2
1
HOT PREWASH OPTION
OFF
DELAY
HOURS
1
PLATE WARMER
(HEATED DRY ON)
2
3
4
5
RINSE ONLY
(HEATED DRY OFF)
START
SHORT WASH
Operating Instructions
Safety Instructions
Consumer Support
Tr
oubleshooting T
ips
6