Hitachi DZMV550A - Manual (Page 165)

English
165
Trouble Messages
A message may appear while you are operating the DVD video camera/recorder. If a message appears,
refer to the following table and take appropriate corrective action.
Messages are arranged in alphabetical order.
Message Cause & Troubleshooting
Reference
page
(1) Data error in a part of
image file. Repair data
now?
(2) Found error in image
file. Repair data now?
(3) Data error in all
image file. Repair all
data now? It is possible that the system cannot normally complete writing of file
when power is turned off for some reason during recording or
editing (deleting, dividing or combining scenes, or creating play list).
Selecting “YES” will automatically repair the video file, but even if
“NO” is selected, the same message will appear when the DVD
video camera/recorder is turned on next time. (Do not remove the
disc while the DVD video camera/recorder is recognizing it: Ignoring
this will deactivate the file repair function.)
Follow the instructions on screen, taking note of the following
cautions:
• Be sure to use the AC adapter/charger to power the DVD video
camera/recorder when repairing data: Repair is not possible
using a battery. If a battery has been attached, turn the power
switch off once, connect the AC adapter/charger, and then start
repairing.
• Data may not be repaired, depending on the timing when power
was turned off.
• Data may not be repaired normally if data recorded on another
recorder is mixed in.
• The repaired data may be different from the original recorded
content because of partial deletion of defective portion.
• Since the date/time for repair is added to the repaired data (only
the corrected portion for partial repair), the original date/time
information will be lost.
• Since all movies, and then all stills, are repaired, the order of
recorded contents will be lost.
(In case of message (2) (3) only)
• See *1 on page 171.

(1) Disc is not formatted.
If it formats, it becomes
possible to use for
camera.
(2) However, when you
record from PC
connection terminal,
please do not format.
(3) Format the disc now? DVD-R disc that was not initialized for camera use was inserted.
45