haier HWM60-10 - Manual (Page 13)

11
Use the operation buttons
b. Operating procedure and explanations for the
buttons
POWER
ON/OFF
START
PAUSE
PROGRAM
DELAY TIME WATER LEVEL
SOAK
WASH
RINSE
SPIN
PROCEDURE STATUS PROGRAM STATUS
JEANS
GENTLE
QUICK WASH
WASH
SPIN
STANDARD
After switching on, the "Standard" program will be the default. If other full-automatic program is
desired, you can press the button "
" to get the corresponding
indicator on. Refer to the "Button of " "
paragraph on page 10.
Example: Use the "Quick" program for slightly soiled articles.
PROGRAM/DELAY TIME
PROGRAM/DELAY TIME
When "standard" program is selected, the washing machine will perform full-automatically
controlled fuzzy program to set water level, water flow and wash duration according to the
cloth nature and weight
Page 10
1 Press the "POWER ON/OFF" button to switch on
the power supply
2 Press the button of" " to
select a suitable full-automatic program
PROGRAM/DELAY TIME
POWER
ON/OFF
PROGRAM
DELAY TIME
If there is water inside the tub,the machine cannot detect the laundries and will display
middle level.If wet laundries are put in,it may display high level.You must set suitable water
level by yourself.
It has the special power resume function. In the case of power failure
or the power plug is loose during washing, the machine can save
the running program, and resume the program after the power
supply is recovered. You do not need to set the program again.