Getting started, Package checklist, Record generator information – Honeywell HW2000i User Manual
Page 11: Inspect for damage, Caution
HW1000i / HW2000i Inverter Generator Owner’s Manual
www.honeywellgenerators.com
5
GETTING STARTED
Use the information in this section to get your generator ready for operation.
Package Checklist
Verify that all of the following items are included in the generator package:
Inverter Generator
Owner’s Manual
Oil Fill Container
Oil Drain Pipe
Spark Plug Wrench
Screwdriver Handle
Screwdriver Universal Bit
Inspect for Damage
Carefully inspect generator for any damage that may have occurred during shipment. If loss or damage is noted after
opening, separate damaged materials and call 1-888-HWHELP1 (494-3571).
Record Generator Information
Write down the identification information specific to your generator in the spaces provided on the inside cover of this
Owner’s Manual. This information is located on the generator nameplate (see illustration below).
ANYONE using this generator must read, understand, and follow all safety and operation instructions provided in the
product manual. Failure to closely follow these instructions can result in circumstances leading to death, serious injury,
and property damage.
Generator is heavy! Obtain assistance to lift the generator to avoid back or other bodily injury.
FIGURE 3: Generator Nameplate Location
WARNING
CAUTION
Model Number:
HW2000i
Phase:
1
Part Number:
101440A
Frequency:
60Hz
AC/DC Voltage:
120V/12V
Engine RPM:
5000
Power Output:
2.0kW
Fuel:
Gasoline
Max. Ambient Temp.: 40
o
C
Insulation Class: F
Serial Number:
p/n 101627A
245453
Northshore Power Systems, LLC
Milwaukee, WI 53212 USA