Hunter Fan HUNTER CEILING FAN TYPE - Manual (Page 12)

12
42825-01 • 05/17/07 • Hunter Fan Company
7-6. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-7. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing
7-8. To install each shade, first loosen the three thumbscrews.
7-9. Raise the shade to the light fixture. Tighten the thumbscrews
securely.
7-10. Install candelabra base light bulbs (60 Watt maximum each).
Note: Glass shade style and number of lights may vary.
Lower
Switch
Housing
Plug
Connector
Steps 7-6 – 7-7
Plug
Connector
Detail
Steps 7-8 – 7-10
Thumbscrews
Shade
Bulb
Housing
Assembly Screw
7 • Completing Your Installation With or Without a Multi Staked Light Fixture (Cont.)