haier XQB50-20 - Manual (Page 16)

Using process Using process
*
*
*
*
Total time: including the normal water inlet time and drain time.
Spin time: the time from intermittent running to finishing
When selecting SOAK program, first soak for 10-40 minutes, then do wash,
rinse, spin.
The total washing time may be influenced by the water inlet pressure and water level.
When selecting QUICK WASH program, wash, rinse and spin are set automatically.
*
*
When the power is switched on, the reservation program is disabled automatically. If you need to finish the
washing in reserved time, please push the RESERVATION button to select suitable program. Refer to the
RESERVATION in Page 11 for selection.
When the reservation program is started, pressing the button,
the numeral tube displays the reserved hours to the wash
cycle end. The point light flashes to indicate in-reservation.
To change the running program or cancel reservation,
you have to switch off the power and make new
selection.
Confirm the reservation program
Page 11
5 Push the RESERVATION button to
select suitable reserve program
RESERVATION
6 Push the START/PAUSE button
START
PAUSE
5 Close the top lid
If you open the top lid, the machine will stop
working except for water filling and spinning
6 Washing finished
After Finishing wash,
alarm automatically
The power will be switched off automatically
after the finishing of the washing.
The washing will finish
about 18 hours later
SURP
LUS(MIN)
RESERVE
(HOURS LATER)