Hyundai DVD Receiver With Bluetooth H-CMD7079 - Manual (Page 17)

17
Radio operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not
available in you area, the following service is not available, either.
Choose Radio Band
Press BND/SYS button on the RC or BD/NP/SUB button on the panel to select a band. The unit has with five
bands: FM1, FM2, FM3, MW1 and MW2. Each of the five bands can store up to six preset stations, for a total of
30 preset memory stations.
Radio Tune/Seek Function
Press NEXT/SEEK+ or PREVIOUS/SEEK- buttons on the RC or PREVIOUS/NEXT buttons on the panel to
manually adjust the radio frequency. Press and hold these buttons, the radio will automatically seek for the next up
or down strong and clear frequency station. Repeat this action to seek for other desired stations.
Mono/Stereo Reception Control
In FM radio mode, press the ST/PROG button on the RC to select stereo or mono reception. “ST ON” will show
on the display indicating that stereo reception is received.
Improvement of reception of distant stations can be done by selecting “ST-PROG” operation which may cut down
some reception noise.
Local/Distance Reception
Press the LOC/RDM button on the RC to select local or distant stations reception.
“LOC ON” shows on the display, meaning that local reception is turned on; “LOC OFF” shows on the display,
meaning that distant reception is turned on.
Local and distance reception setting can facilitate the radio reception, depending on the location in which the radio
is being used.