Humminbird 727 - Manual (Page 74)

69
Digits Format
(Advanced)
Digits Format allows you to add a tenth decimal place to readouts such as
Temperature and Depth. The format can be changed to small format, large
format or no format. This menu choice is available only when in Advanced User
Mode (see Setup Menu Tab: User Mode.)
To change the Digits Format setting:
1. Make sure you are in Advanced User Mode, then highlight Digits
Format on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Digits
Format setting. (Small tenths, Large tenths, No tenths, Default = Small
tenths)
NOTE: Choosing No tenths will cause the display to present numbers rounded to whole
digits only.
531524-1_A - 717 & 727 Man_Eng.qxp 9/30/2006 7:24 PM Page 74