Harbor Freight Tools 66222 - Manual (Page 5)

SKU 66222 For technical questions, please call 1-800-444-3353. Page 5
SymBOLS and
SPeciFic SaFety
inStructiOnS
Symbol Definitions
Symbol Property or statement
n
o
No-load speed
.../min
Revolutions or reciprocation per
minute
PSi
Pounds per square inch of pressure
ft-lb
Foot-pounds of torque
BPm
Blows per minute
cFm
Cubic Feet per Minute flow
ScFm
Cubic Feet per Minute flow at
standard conditions
nPt
National pipe thread, tapered
nPS
National pipe thread, straight
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
eye protection.
WARNING marking concerning Risk
of Hearing Loss. Wear hearing
protection.
WARNING marking concerning Risk
of Respiratory Injury. Wear NIOSH-
approved dust mask/respirator.
WARNING marking concerning Risk
of Explosion.
Specific Safety Instructions
The warnings and precautions dis- 1.
cussed in this manual cannot cover
all possible conditions and situations
that may occur. It must be under-
stood by the operator that common
sense and caution are factors which
cannot be built into this product, but
must be supplied by the operator.
WARNING: The brass components
2.
of this product contain lead, a chemi-
cal known to the State of California
to cause birth defects (or other repro-
ductive harm). (California Health &
Safety code § 25249.5, et seq.)
Only use with accessories rated to
3.
handle the forces exerted by this tool
during operation.
Attach all accessories properly to the
4.
tool before connecting the air sup-
ply. A loose accessory may detach or
break during operation.
Obey the manual for the air compres-
5.
sor used to power this tool.
Install an in-line shutoff valve to allow
6.
immediate control over the air supply
in an emergency, even if a hose is
ruptured.
SaVe tHeSe
inStructiOnS.