Harbor Freight Tools 66222 - Manual (Page 3)

SKU 66222 For technical questions, please call 1-800-444-3353. Page 3
remove or cover objects from the b.
area that you want to protect from
overspray or paint dust.
Operate only in a well-ventilated
c.
area. Paint thinners and solvents
may be harmful if breathed. Always
wear an ANSI approved ventilator
when painting.
do not operate the tool in explo-
d.
sive atmospheres, such as in the
presence of flammable liquids,
gases, or dust. The tool is able to
create sparks resulting in the ignition
of the dust or fumes.
Keep bystanders, children, and
e.
visitors away while operating the
tool. Distractions are able to result in
the loss of control of the tool.
Personal safety
Stay alert. Watch what you are do- a.
ing and use common sense when
operating the tool. Do not use the
tool while tired or under the influ-
ence of drugs, alcohol, or medica-
tion. A moment of inattention while
operating the tool increases the risk
of injury to persons.
dress properly. do not wear loose
b.
clothing or jewelry. contain long
hair. keep hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
increases the risk of injury to persons
as a result of being caught in moving
parts.
avoid unintentional starting. Be
c.
sure the trigger is off before con-
necting to the air supply. Do not
carry the tool with your finger on the
trigger or connect the tool to the air
supply with the trigger on.
do not overreach. keep proper
d.
footing and balance at all times.
Proper footing and balance enables
better control of the tool in unexpect-
ed situations.
e. use safety equipment. A
dust mask, non-skid safety
shoes and a hard hat must
be used for the applicable
conditions. Wear protec-
tive work gloves during use.
f. always wear eye protec-
tion. Wear ANSI-ap-
proved safety goggles.
g. always wear hearing
protection when using
the tool. Prolonged expo-
sure to high intensity noise
is able to cause hearing
loss.
tool use and care
use clamps or another practical a.
way to secure and support the
work piece to a stable platform.
Holding the work by hand or against
the body is unstable and is able to
lead to loss of control.
do not force the tool.
b. Use the
correct tool for the application. The
correct tool will do the job better and
safer at the rate for which the tool is
designed.
do not use the tool if the trigger
c.
does not turn the tool on or off.
Any tool that cannot be controlled