Hoover SpinScrub - Manual (Page 3)

3
Grounding
Instructions
This appliance must be grounded. If it
should malfunction or breakdown,
grounding provides a path of least resis-
tance for electrical current to reduce the
risk of electric shock. This appliance is
equipped with a cord having an equip-
ment-grounding conductor (C) and
grounding plug (A). The plug must be
plugged into an appropriate outlet (B)
that is properly installed and grounded in
accordance with all local codes and
ordinances.
DANGER-
Improper connection of the equipment-
grounding conductor can result in the
risk of electric shock. Check with a qual-
ified electrician or service person if you
are in doubt as to whether the outlet is
properly grounded. Do not modify the
plug provided with the appliance - if it
will not fit the outlet, have a proper outlet
installed by a qualified electrician. This
appliance is for use on a nominal 120
volt circuit and has a grounding plug
that looks like the plug illustrated in
sketch (A).
A temporary adapter (D) may be used to
connect this plug to a 2-pole receptacle
(E) if a properly grounded outlet is not
available. The temporary adapter should
be used only until a properly grounded
outlet (B) can be installed by a qualified
electrician. The green colored rigid ear,
lug, or the like (F) extending from the
adapter must be connected to a perma-
nent ground (G) such as a properly
grounded outlet box cover. Whenever
the adapter is used, it must be held in
place by a metal screw.
NOTE : In
Canada, the use of a temporary adapter
is not permitted by the Canadian
Electrical Code.
A
B
C
D
F
G
E
1. Assembly
Unpack deep cleaner from the carton and identify the
parts shown. Remove and dispose of the packing.
A
B
C D
E F
G
K
L
H
J
I M
1-1
A. Deep cleaner
B. Upper handle with powered hand tool and
scrub module
C. Bolts (2)
D. Nuts (3 - one extra included)
E. Carpet/Upholstery Detergent
F. Bare Floor Cleaner
G. Bare floor attachment
H. Hose holder
I.
Crevice tool
J. Nozzle cleanout-tool
Contained in carton with hose:
K. Hose
L. Stair/upholstery nozzle
M. Tool holder and screw (taped on rack under nozzle)
Carton contents
Continued ➜