Electric start (if equipped) – Harbor Freight Tools Gas Powered Two-Stage Air Compressor 67853 User Manual

Page 34

Page 11

For Engine technical questions, please call 1-800-520-0882.

Horizontal Engines

Electric Start (if equipped)

1. To start a cold engine, move the Choke to the

CHOKE position.

To restart a warm engine, leave the Choke in the

RUN position.

2. Open the Fuel Valve.

3. Slide the Throttle or Speed Control Lever to 1/3

away from the SLOW position (the “turtle”).

Note: Some tools have a Speed Control Lever located

elsewhere on the tool which functions the same as

the Throttle. Use the Speed Control Lever in place

of the Throttle when the tool is so equipped.

4. Turn the Engine Switch to START.

CHOKE RUN

OFF

START