Hitachi DZ-GX5020A - Manual (Page 63)

English
63
3
SWITCHING QUALITY OF STILL IMAGE (QUALITY)
You can switch the still recording quality only when using card.
1
Press the MENU button, use the f/e/
d/c/A buttons to choose “Quality” on
the “Record Functions Setup” menu screen,
and then press the A button.
2
Choose the option you want, and then press
the A button.
3
Press the MENU button to end the setting.
Note
:
• The still quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
• The quality of photos recorded on DVD-RAM is
equivalent to “FINE” on card.
13
SELF-TIMER
You can record photos using the self-timer function, as with ordinary cameras.
1
Press the MENU button, use the f/e/
d/c/A buttons to choose “Self Timer”
on the “Record Functions Setup” menu
screen, and then press the A button.
2
Select “On”, and then press the A button.
The self-timer will be set.
3
Press the MENU button to end the setting.
4
Press the PHOTO button.
The recording indicator at the front of DVD
video camera/recorder will blink.
The self-timer indicator will start to count
down, and recording will commence
approximately 10 seconds later.
Note
:
• You can also check that self-timer has been set by
reviewing the on-screen information.
• To release the self-timer mode, choose “Off” on the
menu screen or turn DVD video camera/recorder off.
• To suspend self-timer, press the PHOTO button again
before recording starts, or press the C button.
It is recommended that you use “FINE” when recording vital images (p. 145 “SIZE AND
QUALITY OF PHOTOS”).
The self-timer function is valid only when recording photos (stills).