Hitachi DZ-GX5020A - Manual (Page 132)

English
132
Disc error has occurred. • Use another disc.
• See *3 and *4 on page 135.
10, 22
• Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/
recorder.
Initialize the disc or use another disc.
• Initializing the disc will erase all data on it.
97
Disc full. Cannot
execute. Delete unnecessary scenes before using this disc, or use another
disc.
77
Disc has no data. This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
—
Disc has no PlayList. Switching of play list was selected with no play list stored. 91
Disc includes protected
scenes. Delete scenes? The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device
that has executed software-protect.
—
Disc is full. Cannot add
control info. The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
77, 79
Disc is not formatted.
Format the disc now? • Has the disc been initialized on a PC?
Choose “YES” and initialize the disc when using it on this DVD
video camera/recorder. Initialization will delete all data on the
disc.
• See *2 on page 134.
97
Disc must be finalized
before it can be played
back on DVD player or
DVD recorder. • This message will appear if you remove a DVD-RW (VF-mode)/
DVD-R that has not been finalized from the DVD video camera/
recorder.
• See *5 on page 135.
106
Drive overheat. Please
retry later. The temperature inside the DVD video camera/recorder is too
high, and reading or writing of the data on disc may not be
performed normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video
camera/recorder is placed in a well-ventilated spot.
29
DVD-R* Disc, 16:9
mode cannot be
changed, when Video
mode is STD. With DVD-RW (VF-mode)/DVD-R/+RW disc, the setting of 16:9
mode will not be possible when the Video mode is STD.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode),
“+RW” will appear when using a +RW.
61
DVD-R* Disc, Video
mode and 16:9 mode
cannot be changed. With DVD-RW (VF-mode)/DVD-R disc, the movie quality mode
and 16:9 mode once used for recording cannot be changed.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
61
DVD-RAM disc. Finalize
is not required. This message will appear if you press the FINALIZE button with a
DVD-RAM loaded in this DVD video camera/recorder. No
finalization is necessary for a DVD-RAM.
100
END OF CARD No more recording on this card can be done: Delete unnecessary
stills or use another card.
77, 145
Message Cause & Troubleshooting
Reference
page