Honeywell CT2095 - Manual (Page 15)

15 69-1385
NOTE: Batteries are required for operation and programming. When inserting batteries, set the
System switch to Off. Remove the battery door (on the thermostat left side) using a coin at
the bottom. Follow instructions in Step 3. Also see the label inside the battery cover for
abbreviated programming procedures for your thermostat.
Set Current Time/Day
To set time, press and release once, press until current shows. To set day, press and
release again, press until current day shows; then press .
Heating Program
With System switch at Heat, press and release once. WAKE, MON FRI (Monday-Friday), and
SET appear on display.
Use to program WAKE time and to program WAKE temperature for MON FRI (Monday-Friday).
Repeat sequence for LEAVE, RETURN, SLEEP.
Clock/Day
Time
Clock/Day
Time
Run Program
Weekday
Time TEMP