Heath Zenith Motion Sensing 3-Way Wall Switch SL-6107 - Manual (Page 11)

-11- 595-4514-14
USing the Light contRoL
One of three functions can be selected by using the three-position
switch on the SL-6107:
off: When you want the light off all the time.
The light will not be switched on by either switch. Put the control
in this position when changing light bulbs.
auto: When you want the light to come on and turn off auto-
matically with motion or turn on with remote switch.
The control will switch the light on when motion is detected. If no
further motion is detected, the light will turn off after the pre-set
time period. To turn the light on again, move in the detection zone.
Flipping the remote switch up or down will turn the light on for the
pre-set time period.
on: When you want the light on all the time.
In this position, the light will remain on all the time, daytime and
night. Flipping the remote switch will not affect the light. The Photo
shut-off is also inactive.
oPeRationS