Harbor Freight Tools 92708 - Manual (Page 2)

SKU 92708 Page 2 For technical questions, please call 1-800-444-3353.
SPecIFIcaTIoNS
Continuous Power 400 Watts
Peak Power 800 Watts
Input Voltage 12 VDC Nominal (11-15 V possible)
Output Voltage 120 V~ / 60 Hz
AC Receptacles (2) Two 3-Prong, Polarized Outlets
Fuse 30 Amps x 2
Indicators Green LED = power on
Switch Rocker type, On / Off
Operating Temperature 14-113° F
Battery Cables 9 AWG, 2’ (approximately)
Features
- Modified sine wave with overload protection
- Low voltage alarm 1 and shutdown 2
1 at 11 V; 2 at about 10 V
Note: Performance of this unit may vary depending on the available battery
power or appliance wattage.
Save This Manual
You will need the manual for the safety warnings and precautions, assem-
bly instructions, operating and maintenance procedures, parts list and diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep the manual and invoice in a safe and dry place for future refer-
ence.
SaFeTy warNINgS aNd PrecauTIoNS
WARNING: When using this device, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
read all instructions before using this product!
do not 1. plug a battery charger into the inverter if the charger has a warning
that dangerous voltages are present at the battery terminals.
keep work area clean.
2. Cluttered areas invite injuries .
keep inverter away from any direct heat source or combustible material. 3.
observe work area conditions 4. . Do not use machines or powered products
in damp or wet locations. Don’t expose to rain. Keep work area well lit. Do
not use electrically powered products in the presence of flammable gases or
liquids.
keep children away
5. . Children must never be allowed in the work area. Do
not let them handle machines, equipment, or extension cords.
reV 05d; 07i