Humax IR-5410Z+ - Manual (Page 8)

1. Connect one end of a RCA cable to the RCA connector on the STB and the other end
to a RCA socket on your TV.
2. Connect one end of a RF lead to the RF OUT connector on the STB and the other end
to the RF IN connector on your TV.
3. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial
channels.
4. Connect the coaxial cable from the LNB to the LNB IN socket on the STB.
1. Connect one end of a RCA cable to the RCA connector on the STB and the other end
to a RCA socket on your TV.
2. Connect one end of a RCA cable to the RCA connector on the STB and the other end
to a RCA socket on your VCR.
3. Connect one end of a RF lead to the RF OUT connector on the STB and the other end
to the RF IN connector on your VCR.
4. Connect one end of a RF lead to the RF OUT connector on your VCR and the other end
to the RF IN connector on your TV.
5. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial
channels.
6. Connect the coaxial cable from the LNB to the LNB IN socket on the STB.
1. Connect an RCA/Cinch stereo cable from the AUDIO L,R sockets on the back of the STB
to the LINE, AUX, SPARE OR EXTRA input sockets on your Hi-Fi system.
There are several ways of connecting the STB to your existing Audio/TV system.
We recommend using one of the following set-up for best results:
TV only
TV with VCR
With Hi-Fi System
STB Connections
GB7