Humax IR-5410Z+ - Manual (Page 47)

GB46
A/V & Data In/Out
TV SCART
VCR SCART
VIDEO
AUDIO R/L
S/PDIF
RS-232C
Video Output(CVBS, S-Video, RGB)
Audio Output
(Resolution : 20 bits DAC, Max. 2 Vrms)
Video Output(CVBS)
Video Input(CVBS, S-Video, RGB)
Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms(fixed))
RCA/Cinch, Video Output(CVBS)
RCA/Cinch Volume and Mute Control
(Resolution : 20 bits DAC, Max. 2 Vrms)
Digital Audio Output, Fiber-Optic(Resolution : 20 bits)
Transfer rate 115,200 bps, 9pin D-sub Type
Physical Specification
Size(W x H x D)
Weight(Net)
Operating Temp
Storage Temp
Storage Humidity
370 x 60 x 280 mm(Excluding the Foot)
Foot height is 8 mm
Around 2.8 kg
0°C to + 45°C
-10°C to + 70°C
5% ~ 95% RH(Non-Condensing)
RF-Modulator
RF-Connector
Frequency
Output Channel
TV Standard
Preset Channel 75
Ω
, IEC 169-2, Male / Female
470 - 860 MHz
CH21-69, CH28-69 or CH13-62 for the Remodulator
PAL I/G/B/D/K selectable by Menu setting
CH36(or TBD). Software changable by Menu
Power Supply
Input Voltage
Type
Power Consumption
Standby Power
Protection 190 - 250V AC, 50/60 Hz
SMPS
Max. 35W
≤
11W
Separate internal fuse. The input shall have lightening Protection
You can use a special antenna switch with DiSEqC commands.
When changing ASTRA1 to EUTELSAT for example, a DiSEqC command is sent with the 22KHz tone
through the antenna cable. The antenna switch will change ASTRA1 to EUTELSAT. The concept of
DiSEqC is a protective trademark of EUTELSAT.
Data rate decides the picture quality of digital TV programmes.
Data rate of about 5-6 Mbit/s coincides with the picture quality of a analog TV programme.