Harbor Freight Tools 91523 User Manual
Page 14
SKU 91523
PAGE 14
FUEL TANK (32)
5.
Turn the Engine Power Switch (2) to its “ON” position. (See Figure F.)
ENGINE
POWER
SWITCH
(2)
ON
OFF
FIGURE F
6.
Hold the Start Handle (41A) loosely and pull it slowly several times to allow the
gasoline to flow into the Engine’s carburetor. Then hold the Start Handle firmly
and pull the rope hard and fast. Pull the rope all the way out, using two hands if
necessary. If necessary pull the rope several times until the Engine starts.
(See Figure G.)
7.
Allow the Engine to run for several seconds. Then, open the Choke Lever (21A)
all the way. (See Figure E.)
FIGURE G
START
HANDLE
(41A)
120 VOLT
DUAL
OUTLETS
(6)