Humax CXC-2000PVR - Manual (Page 68)

**
3. If using Software Update
You can perform Software Update only if you know MUX information of software update correctly.
1. Press the MENU button.
2. Select Installation using the button, and press the
OK or button.
3. Enter Password using the NUMERICAL (0~9) buttons.
4. Select Software Update using the button, and
press the OK or button.
5. Set the Frequency which provides update software.
6. Select the Symbol Rate. You can enter the specific value
by selecting User Define
Note: How to setting parameters in Software
Update is the same as how to set
parameters in Channel Search. Refer
to Channel Search.
7. Select Search and press the OK button to search
software.
8. It is displayed whether or not New Software exist.
If new software does not exist, press the OK
button to
return to the Software Update Menu.
9. Select Yes and press the OK button to start updating.
Select No and press the OK button to return to the
previous menu.
10. Performs Software Update. Please wait until it is
completed.
11. When completing the software update, the product is
automatically powered off and on again.
**
**
GB 67
**
**
**
**
**
**
**
**
**
**
**
**
**
**