Installation – Humax CXC-2000PVR User Manual
Page 61
**
3. Network Search
1.
Select Network Search using the
button, and press
the OK
or
button.
2.
Select Disable or Enable using the OK
or
button.
Note:
Enable allows you to use Network ID.
4. Network ID
1.
Select Network ID using the
button, and press the
OK
or
button.
2.
Select desired Network ID using the
button, and
press the OK
or
button.
3.
If the desired value is not listed, then select User Define,
and enter the value using the NUMERICAL (0~9) button.
**
10. Installation
GB 60
**
**
**
**
**
**
**
**
**
**
**
**
**
**