Installation – Humax CXC-2000PVR User Manual
Page 60
**
This chapter describes how to search for channels and a series of procedures.
10.1. Channel Search
If your product is connected to the cable and television, you can search channels manually by
searching parameters, if you know the MUX information.
1.
Press the MENU
button.
2.
Select Installation using the
button, and press the
OK
button. You will be prompted to enter your
password.
3.
Select Channel Search using the
button, and press
the OK
or
button.
1. Frequency
1.
Select Frequency using the
button, and press the
OK
or
button.
2.
Select frequency value using the
button, and press
the OK
button.
3.
When you select User Define to set frequency manually,
enter frequency value using the NUMERICAL (0~9 )
button.
2. Symbol Rate
1.
Select Symbol Rate using the
button, and press
the OK
or
button.
2.
Select desired symbol rate value using the
button,
and press the OK
button.
3.
When you select User Define to set symbol rate
manually, enter symbol rate value using the NUMERICAL
(0~9 ) button.
**
10. Installation
GB 59
**
**
**
**
**
**
**
**
**
**
**
**
**
**