Hitachi 36UX01S - Manual (Page 6)

6
REMOTE CONTROL BATTERY INSTALLATION
AND REPLACEMENT
CAUTION:
1. If your television set is to remain unused for a long period of time, for instance when you go on vacation, unplug the television from the
wall outlet.
2. Do not subject the remote control to shocks such as dropping it on the floor, etc. Precision parts may be damaged.
3. Do not allow the remote control to become wet and avoid placing it in areas of high humidity. Do not leave it on or near a heater. Excess
heat or moisture may cause the unit to cease operation.
4. If the batteries become exhausted, remote control operation may become erratic or stop altogether. Replace the old batteries with new
AA type.
1. Open the battery cover of the remote control by
pushing the notched part of the cover with your
fingers.
2. Insert two new AA size batteries for the remote
control. When replacing old batteries, push
them towards the springs and lift them out.
3. Match the batteries to the (+) and (-) marks in
the battery compartment.
4. Replace the cover.
BOTTOM VIEW
Lift up on tab to
remove back cover.
NOTES:
1. The CHANNEL NO., VOLUME and OFF TIMER indicator are not displayed simultaneously.
2. To operate your TV, point the remote control at the remote sensor of the TV.
Push in and lift up on tab to
remove back cover.