Harbor Freight Tools GREYHOUND 56072 - Manual (Page 6)

SKU 56072 For technical questions, please call 1-800-444-3353. Page 6
Before use, check for misalignment 29.
or binding of moving parts, breakage
of parts, and any other condition that
may affect the equipment’s operation.
if damaged, have the equipment
serviced before using. Many ac-
cidents are caused by poorly main-
tained equipment.
Use the correct equipment for the
30.
application. Do not modify the equip-
ment and do not use the equipment
for a purpose for which it is not in-
tended.
service precautions
Before service, maintenance, or 1.
cleaning:
turn the engine switch to its a.
“oFF” position.
allow the engine to completely
b.
cool.
then, remove the spark plug
c.
wire(s) from the spark plug(s).
Keep all safety guards in place and in 2.
proper working order. Safety guards
include muffler, air cleaner, mechani-
cal guards, and heat shields, among
other guards.
do not alter or adjust any part of
3.
the equipment or its engine that is
sealed by the manufacturer or dis-
tributor. Only a qualified service
technician may adjust parts that
may increase or decrease gov-
erned engine speed.
Wear ANSI-approved safety goggles,
4.
heavy-duty work gloves, and dust
mask/respirator during service.
Maintain labels and nameplates on
5.
the equipment. These carry impor-
tant information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
Have the equipment serviced by a
6.
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the equip-
ment is maintained. Do not attempt
any service or maintenance proce-
dures not explained in this manual
or any procedures that you are un-
certain about your ability to perform
safely or correctly.
Store equipment out of the reach of
7.
children.
Follow scheduled engine and equip-
8.
ment maintenance.
Refueling:
9.
Do not smoke, or allow sparks, a.
flames, or other sources of ignition
around the equipment, especially
when refuelling.
Do not refill the fuel tank while the
b.
engine is running or hot.
Do not fill fuel tank to the top. Leave
c.
a little room for the fuel to expand as
needed.
Refuel in a well-ventilated area only.
d.
Wipe up any spilled fuel and allow e.
excess to evaporate before starting
engine. to prevent Fire, do not
start the engine while the smell of
fuel hangs in the air.
save tHese
instructions.