A typical wash programme – Hotpoint WM82 User Manual

Page 10

IMPORTANT INFORMATION: Before selecting a programme, ensure the mains

button is in the ‘OFF’ position.

Add detergent and or

conditioner to the

dispenser drawer, see

pages 14-15. Refer to

detergent manufacturer’s

dosage instructions.

Select required wash

programme by turning

the wash dial clockwise,

you will hear a click as

the pointer aligns at the

start position.

Switch on both the

water & electricity

supply at the mains.

Select optional wash

features by pressing

button, a coloured band

indicates selection.

Sort laundry by label

into groups with the

same wash

requirements and

load appliance.

Switch ‘ON’, the door will

lock and after a few

seconds the indicator

light will illuminate

throughout the wash

programme.

1-2 minutes after

completion of the wash

programme the

indicator light will go

out and the door can

be opened.

Switch ‘OFF’ after use.

Close door by applying

pressure at the

3 o’clock position.

Select reduced spin (if

required) by turning the

variable spin speed

control dial.

Note: We recommend on
completion of your wash
programme that you switch
off both the electricity and
water supply to the
appliance.

WARNINGS

●

Do not allow children to

play with the appliance

or tamper with the

controls.

●

Do not overload

appliance! It may

damage laundry and

reduce the quality of

the wash.

●

Do not attempt to open

the door when the

indicator light is on.

A Typical Wash Programme