Honeywell Electronic Programmable Thermostat - Manual (Page 5)

69-0862—2 5
Program Schedule
HEATING PROGRAM SCHEDULE
Weekdays Start Time Heating Temperature Cooling Temperature
WAKE __________ ____________________ ____________________
LEAVE __________ ____________________ ____________________
RETURN __________ ____________________ ____________________
SLEEP __________ ____________________ ____________________
Weekends
WAKE
__________ ____________________ ____________________
SLEEP __________ ____________________ ____________________
WAKE and RETURN start times should include extra lead time, based on outside temperature
and furnace response time, to give your furnace a head start to heat the house.
The temperatures cannot be set higher than 88
°
F (31
°
C) or lower than 45
°
F (7
°
C).
NOTE: If you decide not to program the thermostat, it will automatically control heating at 68
°
F
(20
°
C), and cooling at 78
°
F (26
°
C), 24 hours a day. This guide can be used for program-
ming your new thermostat.
2
1
1
1
2 2
1