Harbor Freight Tools 41209 - Manual (Page 10)

Page 10 SKU 41209 For technical questions, please call 1-800-444-3353.
3. WARNING: When the Trigger (42) is depressed, the Roofing Nailer will fire if the
Nose of the tool comes in contact with anything.
4. Do not press the Nose (72) of the Roofing Nailer against the work surface with
extra force. Allow the tool to do the work. Always allow the tool to recoil off the
workpiece.
5. Caution: While working on roofs, tar and dirt may build up on the Nose of
the Roofing Nailer. This can prevent normal operation. Remove buildup with a
non-flammable solvent. NEVER use gasoline or other flammable solvents. Do
not immerse the Roofing Nailer in an approved solvent beyond the height of the
nail heads, to avoid getting the solvent into the drive cylinder of the tool. Make
sure to dry off the Roofing Nailer before use. Any oil film left after cleanup will
accelerate tar buildup.
6. When finished using the Roofing Nailer, always disconnect the tool from its
compressed air supply. Empty the Magazine (92) completely of nails. Attempt to
fire the Roofing Nailer into a piece of scrap wood to ensure it is disconnected and
is incapable of firing any nails.
7. Make sure to store the Roofing Nailer in a clean, dry, safe location out of reach of
children.
ROOFING SHINGLE
NOSE (72)
TRIGGER (42)
AIR SUPPLY HOSE
(NOT INCLUDED)