Hotpoint WMTL80 - Manual (Page 5)

Follow these 5 steps for a trouble free installation:
1. Choose a Location...
2. Remove Transit Bolts...
3. Levelling...
4. Moving the Appliance...
5. Connect to the Water Supply...
6. Connect to a Drainage System...
Installation Instructions
IMPORTANT INFORMATION:
● Do not plug in and switch appliance on at the mains until installation is complete.
● You may be charged for a service call if a problem with your appliance is caused
by incorrect installation or misuse.
5
The choice of location for your appliance will influence its performance.
● Position where possible on a solid floor. Vibration may occur with a wooden floor.
● Take care with vinyl floor coverings. The weight of the appliance may cause indentations in
some vinyl floor coverings.
● You should not install your appliance on a carpeted floor, but if this is unavoidable, ensure
that air can circulate around its base.
● If locating next to another appliance or an item of furniture, leave space between them to
allow air to circulate.
● For your safety and to comply with IEE regulations, you should not install your appliance in a
bath or shower room. Seek professional advice if you wish to do so.
● Ensure sufficient space is allowed for the appliance - minimum requirement for dimensions
(H) 850mm x (W) 400mm x (D) 600mm
● Ensure the electrical socket and water taps are easily accessible and that the water
supply can be isolated if necessary.
1. Choose a Location...